Artful Home - Finished Quilt!

Monday, July 18, 2011

Here is the finished quilt top.  I picked four patterns to alternate in the main blocks, used a swirly design in the border and made triangles in between the blocks and borders.  I love the way it turned out!  If you are interested in making the top, take a trip down to Valli and Kim - they have the entire line of fabric in their store. An you can find the pattern on-line here!



Double Take Quilt-Along - Cutting and Block Making

Wednesday, July 13, 2011

The beauty of this quilt design is that there are just two blocks. Better yet, both of the blocks are actually the same, just with different colors. Below are the instructions for cutting and piecing the blocks. NOTE: all seams are 1/4"; all sewing is right sides together.


Cutting

Block A

1) Pink: Cut (3) 6.5" strips by the width of the fabric. Then cut the strips into 2" pieces so you have a total of 60 pieces.
2) Magenta: Cut (3) 6.5" strips by the width of the fabric Then cut the strips into 2" pieces so you have a total of 60 pieces.
3) Green: Cut (10) 2" strips by the width of the fabric. Do not make any further cuts at this point.
4) White: Cut (5) 3.5" strips by the width of the fabric. Do not make any further cuts at this point.


Block B

1) White: Cut (6) 6.5" strips by the width of the fabric. Then cut the strips into 2" pieces so you have a total of 122 pieces.
2) White: Cut (12) 2" strips by the width of the fabric. Do not make any further cuts at this point.
3) Burgundy: Cut (6) 3.5" strips by the width of the fabric. Do not make any further cuts at this point



Making the Blocks

I am going to piece the blocks separately, so let's start with Block A:



1) Pull out your cut fabrics for this block. In my case, I will need the pink, magenta, green and white fabric.
2) Take (1) 2" strip of the green fabric and sew it to (1) 3.5" strip of the white fabric. Press seam towards the green side (so that the green seam is tucked under the green fabric and not exposed under the white). I like to press my seams to one side. I'm not a fan of pressing the seams open for various reasons.


3) Take another 2" strip of the green fabric and piece it to the other edge of the same 3.5" strip of white fabric. Again, press towards the green.






4) Continue to do this with the remaining 2" green and 3.5" white strips cut for Block A. You should have a total of 5 sewn green-white-green strips when complete.

5) Now, we are ready to cut these strips into the center pieces for the Block. Cut and discard the selvedge edge from each strip. Then cut 3.5" widths from the strips. Continue cutting until you have 60 green-white-green strips. Wasn't that easier than piecing each individually?



6) Now we are ready to complete the piecing of Block A with (1) 6.5" strip of magenta and (1) 6.5" strip of pink.


7) Sew the magenta strip to the green-white-green pieced center strip. I like to first pin the ends of the pieces together and then to ease in any excess by pinning in the center. Press towards the magenta strip.


8) Next sew the pink strip to the other edge of the green-white-green pieced center strip. Press towards the pink strip.


9) That's it! Your first completed Block A.



10) Continue piecing the magenta and pink strips onto the green-white-green center strips until you have 60 Block A.



Block B is done in a similar manner:

1) Pull out your cut fabrics for this block. In my case, I will need the white and burgundy fabric.
2) Take (1) 2" strip of the white fabric and sew it to (1) 3.5" strip of the burgundy fabric. Press seam towards the burgundy side (so that the burgundy seam is tucked under the green fabric and not exposed under the white).





3) Take another 2" strip of the white fabric and piece it to the other edge of the same 3.5" strip of burgundy fabric. Again, press towards the green.





4) Continue to do this with the remaining 2" white and 3.5" burgundy strips cut for Block A. You should have a total of 5 sewn white-burgundy-white strips when complete.


5) Now, we are ready to cut these strips into the center pieces for the Block. Cut and discard the selvedge edge from each strip. Then cut 3.5" widths from the strips. Continue cutting until you have 60 white-burgundy-white strips. Wasn't that easier than piecing each individually?




6) Now we are ready to complete the piecing of Block B with (2) 6.5" strips of white.


7) Sew the magenta strip to the white-burgundy-white pieced center strip. I like to first pin the ends of the pieces together and then to ease in any excess by pinning in the center. Press towards the white-burgundy-white pieced center strip.




8) Next sew the other white strip to the other edge of the white-burgundy-white pieced center strip. Again, Press towards the white-burgundy-white pieced center strip.


9) That's it! Your first completed Block B.


10) Continue piecing the white strips onto the white-burgundy-white center strips until you have 61 Block B.



That's it! Just two blocks. Now you are ready to start laying out the quilt top!

Feel free to post your progress on the Flickr site!

Artful Home - Corner Blocks & Borders

Saturday, July 09, 2011

The instructions for the black and white corner blocks call for making half square triangles.  While I used the method called for in the instructions, I found it very difficult to get square squares once I pieced the blocks together.  After all was said and done, I called my mom and she told me there was a much better way to make half-square triangles.  Apparently there is a template you can use to make perfect half-square triangles.  While I didn't use the template on this quilt top, I am definitely going to try it for the next top I make with half-square triangles.

After piecing the blocks together, all that was left for the top was the borders, which were a cinch to do.


Here's a hint for making non-wavy square borders:

1. Determine the length of the quilt border by averaging two to three center measurements of the quilt body.
2. Cut two borders the average length and pin them to opposite sides of the quilt. Match the ends and centers then gently ease in any fullness.
3. Pin, sew, and press.
4. Repeat for the top and bottom borders measuring the width, averaging, etc.

 

Here is the finished top!  All that's left is the quilting. 

Double Take Quilt-Along - Fabric Selection

Wednesday, July 06, 2011

Color and Fabric Selection

I have to admit that one of my favorite parts of quilting is the planning! Picking out the fabric can sometimes be frustrating, but it's made a bit easier with software programs available these days that can let us preview the colors and fabric choices together with the quilt design we have in mind. I'll go through how I picked out the fabrics for this quilt. You do not have to follow the same strategy as I did, but I wanted to go through my train of thought for picking the colors and fabric.


For the quilt blocks in this particular design, I knew I would need four colors (plus white for the background). I started with two complimentary colors in mind. Complimentary colors are colors that are on the opposite sides of the color wheel. I chose a green/yellow and a magenta. Then I took the magenta, and picked two more colors from the same hue but with different values (value being the lightness and darkness of a color) - a pink and a deep burgundy. I finished it off with a white for the background color.


You can choose to use the same colors as I did, or pick your own. You don't even have to stick with complimentary colors. Some other options are split complimentary, analogous, even monotone. Just pick two colors and then vary the value on one of the colors to get two more. For my fabric, I chose to stick with solid colors, but you don't even have to do that - there are plenty of fabric lines out there these days that would work nicely for this design.

Once I had the fabric choices selected, I did a mock-up of the two different blocks. I used the light and medium values (pink, magenta, and green) for Block A and the deep value (deep burgundy) for Block B.


Once the blocks were complete, I did a mock-up of the overall design for the quilt.



As I mentioned, you can also choose to use patterned fabric as an alternative to solid colored fabric. These days, designers do a great job of putting out fabric lines that you can make a quilt exclusively out of. To see what a pattern option might look like, I picked out some fabrics from Sandy Gervais' Giddy line. One limitation to using patterned fabric from one collection is that the values may not vary as much as you'd like. The resulting quilt can be just as beautiful, but it may not have all the value changes you are looking for. You can see below there were basically two rather than three different values in the Giddy collection - just pink and red, but no burgundy. But I think the overall look is still beautiful!



Fabric Requirements

Here are the fabric requirements for the quilt top once the fabric selection is made. Keep in mind that this does not include the backing. The finished top will be 66" x 66".



Feel free to post your progress on the Flickr site!

Double Take Quilt-Along

Thursday, June 30, 2011

Ok, I admit it, I'm a quilt-a-long addict. I guess I can add that to my blog header next to chai addict! What I really like about the quilt-a-long format is the discipline. Just ask my husband, I work best with deadlines. So when the quilt-a-long format came along, the engineer in me really responded to it. It's just like a project plan - a clear objective, resource allocation, weekly milestones. It was a match made in heaven. I've gotten so many quilt tops done with this format, I can hardly believe how productive I've become.

So when I finished my last quilt-a-long, I decided I wanted to try one of my own. So here we are.

The design for this quilt top was inspired by a Quilt Mockup Tutorial on Fresh Lemons. The tutorial talks about how to design a quilt using Photoshop Elements. I had previously been using another graphics program, but the software company decided to stop making it for the Mac and the VERY old version I owned couldn't keep up with my computer's operating system anymore. So I was very excited to learn how to use Photoshop Elements for quilt design. As I took the tutorial, I quickly realized there was a great quilt design in the blocks I was building, twisting, and turning. With permission from Faith at Fresh Lemons, I decided to use the quilt that came out of that tutorial for a quilt-a-long. Check-out the Fresh Lemons website for more inspiration and to take the Quilt Mockup Tutorial. Thanks, Faith!

I'm calling this design Double Take - amazingly, it is made out of only two quilt blocks! Quilt-a-long with me! Since this quilt is only made up of two blocks, it will take no time at all.

Posts
July 6: Fabric Selection
July 13: Cutting and Block Piecing
July 20: Assembly
July 27: Quilting

Feel free to post your progress on the Flickr site!

Artful Home - Piecing

Tuesday, June 28, 2011

The piecing instructions fror the main blocks were pretty straight forward.  Here is a recap:


1) Mark the diagonal of the half square triangles.
2) Sew the HST to the center block.
3) Cut the excess from the HST.
4&5) Attach the first round of strips.
6) Attach the second set of HSTs (cut the excess here as well).
7&8) Attach the second round of strips.
9) Finished blocks.

One thing the instructions did not discuss...if you are OCD about corners like me, you will want the HST from the second round to line up with the corner of the HST from the first round:



To do this is pretty easy:



1) After marking your HST block (for the second round), fold the HST block in half perpendicular to the marking in order to find the dead center point.
2) Here you have the center crease crossing the marked diagonal.  The intersection is the center point
3) Stick a pin in the wrong side of the HST through the center point.
4) Stick the pin in the exact corner of the first round HST.
5) Set the HST block in place.
6) Sew all the HSTs to the block.

Here are the pieced blocks so far:

Artful Home Quilt - Cutting

Friday, June 17, 2011

First order of business....cutting.  Though the instructions on what sizes to cut each fat quarter were pretty straight forward, the diagram provided was not quite to scale.  I found it much easier to do the following:


1) Square left and lower edges of the fat quarter.
2) Cut both 'A' pieces as the diagram indicates.
3) Then, cut a 9" strip straight across the remaining width of the fat quarter. 
4) Cut the 'B' and 'C' pieces from the 9" strip.
5) Now cut a piece 2 1/4" wide the 9" length.  Then cut this strip into the four 'F' pieces, since 2 1/4 * 4  = 9"!
 6) Proceed to cutting the remaining pieces from the fat quarters as shown in the instructions.  

Once I had all the fat quarters cut, the rest of the cuts were a piece of cake!

While getting ready for my first round of piecing, I laid the cut pieces out in the order they would be sewn into the quilt top and found that I liked the look of the square-on-squares.  Hum, maybe I need to pick up some more of this fabric from Valli and Kim to make another top! :)

Artful Home Quilt from Valli and Kim

Saturday, June 11, 2011

I recently discovered a new addition to the quilt store scene in the Austin Area: Valli and Kim down in Dripping Springs.  If you haven't been yet, it's a must visit.  The store is stocked with the latest trends in modern quilting fabrics, from Kate Spain, Joel Dewberry, Basic Gray and much, much more.  I just picked up this gorgeous Henry Glass fabric from there and am eager to get quilting with it.  The Henry Glass website even has a free design download specifically for these fabrics.  I'll be going over the instructions on how to piece the top over the next few weeks, so feel free to join in.  Valli and Kim stocks the entire line, called the Artful Home from Henry Glass.  Download the instructions for the pattern here.  

Hover to Pin

 
Designed with ♥ by Nudge Media Design